The process of roof waterproofing in Dubai is vital. The membrane needs to be able to accommodate movement and cover concrete cracks. Manufacturers rate the elongation of a membrane by percent. Typically, a material can extend up to 150% beyond its natural shape. However, too much waterproofing will trap moisture or water inside the building, so be sure to choose a product that meets these requirements. The following tips will help you determine the correct type of roof waterproofing for your building.
Check the condition of your roof for damage:
First, check the condition of your roof for damage. Remove shingles that have been damaged, as this will expose the underlayment. Wind and sun can also damage the underlayment. You’ll need to determine whether or not you need to replace the entire roof or fix some of the damaged sections. In addition, check for cracks in metal seals known as flashing. These seals connect the roof to vents, skylights, and other areas.
Consider a liquid applied roof system:
Investing in a good roof waterproofing solution will reduce maintenance costs. The quality of the materials will ensure a long life for your roof. If you want the best investment possible, consider a liquid applied roof system. This high-perform liquid-applied owing solution for flat roofs combines the benefits of liquid-applied systems. These roofing solutions are the most durable and practical option for homes and businesses.
Invest in a waterproofing system that will last for many years:
While the process of roof waterproofing may cost more, it will protect the building and its contents. The process will also help you keep the temperature steady. Without a proper waterproofing system, leaks can be a severe risk to a building. As a result, you should invest in a waterproofing system that will last for many years. If you want to get a warranty for your roof, be sure to ask about it.
Should be compatible with the substrate:
A waterproofing solution should be compatible with the substrate. If you have a single-ply roof, you should avoid urethane or acrylic elastomeric. It should be able to accept silicone and aqueous-based coatings. Before using a liquid-based waterproofing solution, you should clean the substrate. Make sure it is scorched before applying the membrane. If you don’t, it will not stick to the substrate and cause more problems.